My curiosity about TenPoint’s new Defender CLS immediately went off the scale the moment I laid eyes on it at the 2009 SHOT Show. My first thoughts were: this looks a lot like my TenPoint Phantom CLS, minus the camo pattern on the riser and barrel. When I read the specs on this new crossbow, I knew I had to have one. My test sample arrived at home base not to long after I had finished unpacking my bags after returning home from the SHOT Show. I eagerly opened the box, and began to assemble the crossbow. It was still early enough in the day to take it out for a test run. I quickly laid down a layer of string wax and rail lube, grabbed my chronograph and headed outside to the test range.

Read the rest of the review here....

Reviewed By Geoffrey Toye, HBM European Correspondent

Bad River Outdoors offers bow-type open sights for field or hunting crossbows, with mounts tailored to suit the crossbows made by the principal bowyers. When I was invited to test one I requested a mounting to suit my Excalibur. This is my favorite bow for shooting with the open sights with which it is already fitted, so I am use to how it performs without the now ubiquitous telescope sight.

The Tagged-Out aperture sight is a simple, robust peep, adjustable for windage and elevation and which mounts onto the rail normally used for the telescopic sight option on the Excalibur. Immediately I could see a practical advantage in this in that, were a telescopic sight to receive serious damage in the field, perhaps a far and foreign field, the aperture could be ready to replace it on the scope rail.

The rear-sight is well finished, perhaps too well for the incautious that could actually slice a finger on the dovetail so precisely was it machined. So fine was the tolerance, when I fitted it to the rail, it needed a drop of gun oil to allow it to slip on. Once in position, it was anchored with an interference grub screw. This set the screw well down in its own threaded hole, and I would have like to have seen the option of a slightly longer screw to take into account dovetails with a deep valley, as is the case on the Excalibur...

Read the rest of the "Tagged-Out Bowsight Review.....

This British made sight from Hawke Optics is the one Jim Kempf selected for his Scorpyd crossbow. It is a conventional multi-reticle sight with a particularly nice image quality and evidently, as you will see, robust build.



To the uninitiated, it might seem that a telescopic sight is just a telescopic sight, but actually the application for which it is intended has critical implications for the design, one size done not fit all. For a crossbow, parallax adjustment has to be within the same parameters as the normal shooting range of the bow, units of adjustment for elevation have to be realistic and the delicate innards have to be protected from vibration and done so specifically with regard to the directions from which impact will arrive – the recoil patters of a crossbow may feel like a medium bore rifle but are actually quite different.

Read the the rest of the review of the Hawke Optics 3x32 Multi Reticle Crossbow Scope...